DigiSound-Jumbo3

52 000 Ft

available

Main parameters:

  • typically for operating G or 1 scale locomotives, with amplified motor and sound decoder with function outputs,
  • communication according to NMRA DCC standards,
  • 28, 128 speed gears, programmable speed curve,
  • address range 1-9999,
  • up to 5 A motor drive output,
  • performance control (can be enabled or disabled from the CV register),
  • 20 kHz motor PWM frequency,
  • 12 db. short circuit protected function output,
  • also works in analog mode track (after enabling analog mode!),
  • asymmetric DCC signal detection (ABC mode),
  • RailCom communication,
  • Consist (multi-locomotive) mode,
  • SUSI interface e.g. to operate a dynamic smoker,
  • light change function,
  • shunting mode,
  • acceleration, deceleration on and off,
  • driver function,
  • decoupling function,
  • 2 pcs. model servo motor output,
  • size: 72 * 30 * 13.5 mm.
For more information, see the Device Decoder user manual (in the "Downloads" folder) in the following topics.
  • general description,
  • main parameters,
  • audio playback features
  • pre-installation operations,
  • device explanation,
  • DigiSound-Jumbo3 outputs,
  • Startup,
  • engine control output:
    • setting the load controller,
    • Here are some tips for finding the best running option.
    • locomotive speed adjustment,
    • the 3-point speed curve (CV29.4 = 0),
    • the 28-point speed curve (CV29.4 = 1),
    • speed setpoint multiplier,
    • acceleration deceleration setting,
  • setting of function outputs, registers of function outputs:
    • assign function buttons to output,
    • setting the function output mode,
  • other features:
    • shunting mode,
    • disable acceleration,
    • light change control,
    • driver mode,
    • analogue mode,
    • operation on a section controlled by a brake generator,
    • ABC mode,
    • RailCom,
    • multiple locomotive mode (consist mode),
    • SUSI interface,
    • save function button status
    • heavy train function,
    • servomotor control,
  • direct connection points for connecting an external energy storage unit (DigiPack),
  • configuration registers CV29, CV49,
  • sound settings:
    • adjust the volume,
    • adjust the volume of individual sounds
    • 16-bit sounds
    • acceleration delay,
    • steam locomotive mode,
    • synchronous signal input,
    • steam sound on several channels,
    • random starting sounds,
    • volume reduction,
    • engine speed,
    • sound mute function,
    • audio output controlled acceleration disabled,
  • programming:
    • ACK impulse,
    • Restore and save the basic state of CV registers,
    • calculating long address,
    • default setting of function buttons,
  • CV registers.
preloader