DigiSound-5.2

32 000 Ft

soon

Main parameters:

  • Equipped with 6-pin interface according to NEM651 standard,
  • NMRA DCC communication,
  • 28, 128 speed gears, programmable speed curve,
  • address range 1-9999,
  • up to 1 A motor drive output,
  • performance control (can be enabled or disabled from the CV register),
  • 18 kHz motor PWM frequency,
  • 6 short-circuit-proof function outputs (max. 700 mA in total, 4 function outputs available separately on the decoder),
  • available with the following interface types:
    • 90s,
    • straight,
    • fitted with a short cable. 
  • Works on analogue track as well (must be authorized separately),
  • asymmetric DCC signal detection (ABC mode),
  • permanent braking distance in ABC mode,
  • RailCom communication,
  • Consist (multi-locomotive) mode,
  • FL, F1-F28 function operation,
  • light change function,
  • shunting mode,
  • acceleration, deceleration on and off,
  • driver function,
  • train shutdown function,
  • 3 or 28 point speed curve adjustment,
  • Sizes:
    • 10.5 * 16.5 * 4 mm (NEM651, NEM652).

 

In addition to the decoder loaded with matching sound material, a speaker and a suitable sound bucket are also provided.
You can find more information on the following topics in the user manual for the train decoder (in the "Downloads" folder) :
  • main parameters,
  • general characteristics of the functionning software,
  • Wiring,
  • Startup:
    • engine control output,
    • setting the load controller,
    • locomotive speed adjustment,
    • the 3-point speed curve (CV29.4 = 0),
    • the 28-point speed curve (CV29.4 = 1),
    • speed setpoint multiplier,
    • acceleration deceleration setting,
    • function outputs,
    • function output registers,
    • setting the function output mode and the "basic brightness",
  • other features:
    • analogue mode,
    • operation on a section controlled by a brake generator,
    • ABC mode,
    • RailCom,
    • multi-locomotive operation (consist mode),
    • decoupling function,
    • save function button status
    • heavy train function,
    • configuration registers CV29, CV49.
  • sound settings:
    • adjust the volume,
    • adjust the volume of individual sounds
    • 16-bit sounds
    • acceleration delay,
    • steam locomotive pace,
    • synchronous signal entered,
    • steam sound on several channels,
    • random starting sounds,
    • volume reduction,
    • engine speed,
    • sound mute function,
    • audio output controlled acceleration disabled,
  • programming:
    • ACK impulse,
    • Restore and save the basic state of CV registers,
  • default setting of function keys,
  • CV registers summary table.
preloader