DigiPack

11 000 Ft

available

Main parameters:

  • to eliminate operational uncertainties resulting from short-term power outages of locomotives,
  • in different sizes,
  • with different capacities,
  • input voltage: DC 6V – 24V
  • output voltage: DC ~ 8V
  • load capacity: 1000mA
  • power consumption:
    • in the charged state ~ 10mA,
    • under charging ~ 500mA,
  • charging time from 0% to 90% ~ 15sec (after full discharge it is how much you have to wait for proper operation)
  • the voltage feedback time depends on the applied load and the type of DigiPack, it can vary from a few seconds to more than 10 seconds.
For more information about the following topics in the Device Decoder Management Guide ("Downloads" folder) :
  • general presentation,
  • the main features of the DigiProgrammer tool,
    • versions,
    • physical dimensions,
    • input voltage,
    • output voltage,
    • load capacity,
    • capacity,
  • Wiring:
    • general description,
    • Connecting DigiDrive-xx and DigiSound-xx decoders
    • Connecting the DigiSound-JUMBO3
  • software settings for DigiDrive-4.x and DigiSound-5.x decoders:
    • setting the output to control the operation of the DigiPack on the decoder
    • enable the operation of the DigiPack,
    • DCC "time out",
  • software settings for DigiSound-Jumbo3 decoders:
    • setting the output to control the operation of the DigiPack on the decoder
    • enable DigiPack operation
    • DCC "time out",
  • with the DigiPack enabled, neither the firmware update nor the sound download will work!
preloader