1047/470 "Taurus" - DigiTools

Information:

the sound material of the MÁV 1047 (H-START 470, ÖBB 1016/1116) locomotive,

the sound material was made using recordings of locomotives 1116 006, 1116 007, 1116 047,

the recordings were made in 2017 – 2018,

8-bit resolution

the sound material

freely editable with our DigiSoundEditor sound editing program,
can be downloaded freely with our DigiProgram download program,

the downloadable dtt files contain the recommended CV settings

for PluX22-prepared Roco locomotives, DigiSound-3.5 (from v27), 4.5 (from v34) and DigiSound-5.5 decoders,
for Jägerndorfer Collection locomotives which have 21MTC and 8-pin sockets at the same time, in DigiSound-3.1 or 3.4 (from v27), 4.1 (from v34) and DigiSound-5.1 or 5.4 decoders.

The dtt file under the “Downloads” tab can be opened with an application called DigiProgram, making it easier to see, manage, write and read the locomotive’s CV parameters.

Recommended CV settings:

	Roco PluX22 (old - e.g. 62368 - 1047 003)		Roco PluX22 (new - e.g. 73522 - 470 009)		Jägerndorfer Collection (Basic)
Name	CV register	Recommended value	CV register	Recommended value	CV register	Recommended value
High beam settings	CV138	5	CV119 CV123 CV134 CV192 CV142 CV194	133 133 5 1 5 2	CV126	5
Adjusting the end lights	CV126 CV190 CV130 CV191	7 1 7 2	CV126 CV190 CV130 CV191	7 1 7 2	-	-
Setting function modes	-	-	-	-	CV178	1
Adjust brightness	CV300 CV301 CV312 CV313 CV314 CV315	64 64 16 16 40 40	CV300 CV301 CV312 CV313 CV314 CV315	64 64 16 16 40 40	CV300 CV301 CV302 CV312 CV313 CV314	64 64 64 16 16 16

The recommended CV settings are applied for the Roco PluX22 and Jägerndorfer Collection which are equipped with a 21MTC or 8-pin decoder! Older NEM652 Piko or Roco models with an 8-pin connector do not require special settings.

Function allocation:

Function key	Function / Sound	Volume CV register *	Default value
F0	basic lighting forward 3 white headlights (Piko 8-pin, Roco PluX22) front 3 white headlights, rear 2 red locks (Roco 8-pin, JC)
F1	complementary operation inverter brake sound brake release	CV220 CV222 CV226 CV227	255 255 255 255
F2	horn	CV223	255
F3	horn - deep	CV224	255
F4	horn - high	CV225	255
F5	** high beam higher brightness and switching to the two upper headlights (for Roco PluX22 and JC locomotives) dimming (Roco and Piko locomotives with 8-pin decoder)
F6	shunting mode
F7	** tail light (Roco PluX22)
F8	fan	-	-
F9	volume adjustment in 2 steps	simple volume CV210 double volume CV211	164 80
F10	horn signal	CV221	255
F12	arc sound	CV235	255
F13	connection	CV234	255
F14	announcement by voice 1	CV232	255
F15	voice announcement 2	CV231	255
F16	voice announcement 3	CV230	255
F17	voice announcement 4	CV229	255
F18	voice announcement 5	CV228	255
F19	flange lubrication	CV233	255
F28	mute the sound

* The volume for the given sound (eg long horn) can be adjusted individually in the indicated CV register! ** When using the recommended settings!

1047/470 “Taurus”

Information:

Recommended CV settings:

Function allocation:

Sounds

CV Register Files

You may also like…

DigiSound-5.5

DigiSound-5.1